Looking for “TCL 20 R 5G stuck on boot screen” returns results that aren’t very frequent or exceptional. This might happen for a number of reasons, such as the installation of a new app, the usage of a more modern operating system, or even just a minor update to Android. Because to this flaw, you will no longer be able to fast forward through the original equipment manufacturer’s logo during bootup.
Some of the devices may also have a somewhat different problem, in which their phones enter a persistent boot loop and keep restarting endlessly. How should you proceed if such is the case? I’ve compiled some pointers that should be useful on your journey.
1: Execute a Hard Restart [ TCL 20 R 5G Stuck on Boot Screen ]
Hardware key and brute force rebooting is functionally equivalent to a standard reboot. Look up the specific brand and model number to find out what key combination is required. Combining the Power button with the Volume Down or Volume Up buttons will cause an immediate restart.
When you’ve worked out the right combination, you’ll need to press and hold both buttons for around 30 seconds to power down and restart the TCL 20 R 5G. By just pressing and holding the power button for a few seconds, you may force the phone to restart. In the event that this solution doesn’t work, please try another of the many alternatives provided below.
2: Starting in Safe Mode
Safe Mode on your TCL 20 R 5G is a bootable safe zone where no non-essential software or processes are allowed to run. When the phone is virtually back to factory settings, you may check to see if a third-party app is to blame for its failure to boot up correctly. Whether you follow the instructions below, you should be able to see if you can get rid of the issue.
- After pushing the power button once, hold it down for several seconds to get the Power off option. Upon reaching this screen, you will be invited to enter “Safe Mode;” clicking “Yes” or “OK” will do the work.
- Try uninstalling any new software to see if that helps.
- It only takes a touch of the power button to exit Safe Mode.
Assuming your TCL 20 R 5G works normally in Safe Mode, the issue must reside with the third-party applications you’ve loaded. The obvious exception to this is if you’ve already tested this and discovered that it worked properly; in that case, you should continue using the current mode. Please try the following suggestions to see if they help you fix the problem.
3: Modifications to the Software or Its Version [ TCL 20 R 5G Stuck on Boot Screen ]
After updating to a newer version of the Android firmware (whether it be beta, incremental, or major), if your TCL 20 R 5G becomes stuck on the boot screen, you will need to take corrective measures.
You can get the firmware you need to update to a newer version from the OEM’s website or other sources. You should upgrade to the latest revision instead of trying to downgrade.
The Recovery Mode supports the installation of third-party software from removable media. In order to use “Apply Update from ADB,” a user must first connect their phone to a computer that has the requisite ADB utilities installed. The software may be updated once you’ve rebooted your device by navigating to Settings >> About Phone and then hitting Software Updates. Know that erasing your account might delete all of your data.
4: Clear Cache Drive
Clearing the cache partition is an excellent alternative to the more extreme measure of doing a hard reset (method 2). Following these steps will allow you to bring about the desired outcome.
- By turning off power, the TCL 20 R 5G enters Recovery Mode. To be sure, for 30 seconds, press and hold the Power button and either the Volume down or Volume up keys.
- When you see the Android logo, you may let go of the keys to enter recovery mode.
- You should then pick “Wipe Cache Partition” from the resulting menu. If your gadget doesn’t have a touchscreen, you’ll have to make do with the power button and volume buttons to access its menus and functionalities.
- To verify the results of clearing the cache partition, restart the computer.
5: Complete a Hard Reset [ TCL 20 R 5G Stuck on Boot Screen ]
You should know a few things before you do a hard reset. At first, it will overwrite everything on your TCL 20 R 5G, making it difficult to get back any data you may have had before without using specialized data recovery software. Second, it’s generally seen as a foolproof method of fixing any and all troubles you’re having with the software; for hardware-related problems, professional help is required. Instructions for returning to factory settings are provided below.
- On the TCL 20 R 5G as I snooze.
- After that, you’ll need to hold the Power and either the Volume Up or Volume Down buttons for 30 seconds for a factory reset.
- You can stop holding the buttons when the phone has entered recovery mode.
- Select the “Wipe data/factory reset” menu item. There’s no touchscreen, so you’ll have to navigate and make your choices using the physical volume controls and power switch.
- To begin, choose “Yes — permanently delete all user data.”
- If you’ve reached the boot screen and need to reboot immediately, selecting “Reboot system instantaneously” is your last resort.
6: Use the assistance of an expert
As it turns out, addressing the issue calls for more advanced debugging tools like bootloader unlocking and flashing modified operating system images. At a dependable service centre, you may get help from a trained professional like a technician.
Closing Words
Try some of the suggestions we made if your TCL 20 R 5G is unable to get past the boot screen or is stuck in a boot loop. The steps described here should not be attempted without first consulting with professionals in the field to see if doing so is feasible.
Also read: Fingerprint sensor not working on TCL 20 R 5G? Fix it now