Poco X3 Pro Stuck on Boot Screen? Try this

Poco X3 Pro Stuck on Boot Screen? Try this

Poco X3 Pro

If you are searching for Poco X3 Pro stuck on the boot screen. This isn’t common, but not so rare either. Any change to your device’s OS or installing new apps or even upgrading to a higher version can cause this issue. What this issue does is essentially restrict the boot screen so you won’t be able to go past the OEM’s logo.

In some cases devices might end up in a slightly different issue, their phones will enter a constant boot loop where it constantly reboots even though you shouldn’t. If this happens, here are some ways you can try fixing this problem.

1: Perform a Forced Reboot

If your Poco X3 Pro has gotten stuck on the boot screen or it has entered a reboot loop, a force reboot can break the chain. It uses hardware keys and brute force to do an immediate reboot. You need to find the combination of keys according to your make and model. What you should do is, Press Power + Volume Down button Or Power + Volume UP button to force a reboot.

With the correct combination for your Poco X3 Pro, press and hold both the buttons for 30-odd seconds until the device shuts down. Use the power button to restart the phone after a few seconds and this should work. If not, there are more troubleshooting methods listed here to consider.

2: Boot into the Safe Mode

A Safe Mode on your Poco X3 Pro is basically a bootable safe place where all third-party apps and processes are stopped. Since the phone is almost in its original settings, you can check whether a third-party app caused the device to be stuck in the boot loop. You can try to fix the issue by following instructions listed below.

  • First, press the power button once to reveal the Power off the menu and hold the “Power Off” button for a few seconds. This is when you’ll be asked to enter “Safe Mode” so tap on “Yes” or “OK” to confirm.
  • Try uninstalling recently downloaded apps and games from your system to see if it fixes the issue.
  • You can exit Safe Mode simply by pressing the Power button.

If your Poco X3 Pro is behaving normally in Safe Mode, there may be something wrong with third-party apps. However, if everything not running smoothly in this mode, you should shift your focus to other important issues. Follow the next troubleshooting steps mentioned here to try and fix the problem.

3: Upgrade/Downgrade Software

If you tried to upgrade to a newer Android firmware (could be beta, incremental, or major upgrade) or rather considered downgrading, you need to use countermeasures to fix your Poco X3 Pro stuck on the boot screen.

If you want to upgrade to a newer firmware, you’ll first need to download the current version of the firmware from your OEM’s website or other sources. Similarly, if you want to downgrade, you will first have to upgrade to the current version when available in order fix issues.

With the help of Recovery Mode you can apply updates from the SD Card. You can use ADB tools installed on your PC and connect the phone to it to use the “Apply Update from ADB”. If you can turn on the phone somehow, you can use the Software Updates section via Settings >> About Phone to load new firmware and install it. Note that this will delete all of your user data so be careful before doing this!

4: Wipe Cache Partition

Hard resetting the phone is a drastic measure and can leave your data vulnerable. Before you do it, make sure you try wiping the cache partition first. Here’s how to do it.

  • Enter the Recovery Mode on your Poco X3 Pro by powering off the phone. Use Power + Volume Down or Power + Volume Up and hold it for a straight 30 seconds.
  • As you see an Android logo, you can release the keys and boot into recovery mode.
  • Here, you need to select “Wipe Cache Partition” from the available options. Again, there’s no touchscreen here so you will need to use the power button to select an option and volume up/down for navigation.
  • Finally, select the option “Reboot system now” and check if clearing cache partition made a difference or not.

5: Pull off a Hard Reset

When you take your Poco X3 Pro for a hard reset, there are some things to keep in mind. First, it will delete and eliminate all the data stored on your device. Unless you’re using a data recovery program, you won’t be able to recover the deleted data. Second, it is often considered one of the powerful methods of fixing any and every issue related to the software. You’ll need a technician to tackle any hardware-based issues. Here’s how you can do a hard reset on your device.

  • Turn off your Poco X3 Pro.
  • Now, you should either press Power + Volume Up Or Power + Volume Down buttons together and hold it for 30 seconds.
  • Once the phone boots into recovery mode, release both of the buttons.
  • You need to select “Wipe data/factory reset”. Here, you need to use volume up/down and power buttons to navigate and select as you cannot use a touchscreen.
  • Next up, select “Yes — delete all user data” and the process will begin.
  • Finally, select the “Reboot system now” option and that should fix the stuck at boot screen issue for you.

6: Get an Expert’s help

Advanced troubleshooting like unlocking the bootloader, flashing custom ROMs, among others can help fix the issue. You can get help from a professional such as a technician from an authorized service center.

Closing Words

These were some of the troubleshooting methods that you can use if your Poco X3 Pro is stuck in the boot screen or boot loop. Some of the methods listed here might be too technical, so if you are not comfortable doing it, get help from those who can do it for you.

Also read: Fingerprint sensor not working on Poco X3 Pro? Fix it now