While it is true that Android devices are quite flexible, a few issues still need to be solved. One of the many issues that could arise on your LG Velvet 5G UW is how to address the issue of the screen becoming black and becoming unresponsive. You need to be aware that the phone is still ON, receiving calls, texts, and alerts, and that the flash is working in order to distinguish between a black screen issue as well as a phone that won’t turn on issue. Yet there is nothing on the screen and it cannot be utilised in any way.
Weak LCD connections, mismatched software, a disastrous system failure, or stored cache files if they were the source of the issue are a few possible reasons of failure. Additionally, screen blackouts might happen when phones are exposed to greater temperatures. You may attempt the following remedies to repair the black screen issue on your LG Velvet 5G UW:
1: Verify that the power button is not stuck in position
You can restart, switch off, and enter different bootable modes on your LG Velvet 5G UW phone with the power button. In light of this, there may be a number of issues if the power cord becomes stuck. First off, a jammed power button might result in a reboot cycle or leave your LG Velvet 5G UW in the powered-down state until you figure out how to repair the button. The buttons may become blocked when your pocket contains lint, lotion, dirt, or any other form of debris and is placed on a table or the other flat surface.
You may try quickly pressing the button a few times to see if there is any debris caught. You may also use a sharp object to scrape off extra material, but be cautious not to pry too hard or you could damage the button.
2: Examine the charging port [How to solve the Black Screen problem on the LG Velvet 5G UW]
Debris in the charging connector is one of the potential causes of Android smartphones having black screen issues. Once again, you might try to clean the port by inserting a sharp item inside, but take care not to be overly intrusive. Use a toothpick is the solution. After cleaning the charging port, verify that your LG Velvet 5G UW has returned to its pre-cleaned state.
3: Wait till the battery runs out
Even if the touchscreen appears to be functioning since it is receiving calls and texts but isn’t showing anything on the device, you should wait till the battery dies. It will take a while for the battery to entirely charge because the LG Velvet 5G UW consumes the least amount of power while the screen is off. Because of this, you will need to wait a little longer, but if the battery is completely dead, you may recharge it and see if rebooting the phone is beneficial.
4: Force Reboot [Lg Velvet 5G UW Black Screen Fix]
You can’t just turn your LG Velvet 5G UW off in the hopes that a fast reboot will cure the situation since you can’t utilise the screen. However, forced reboot methods that use physical buttons are available on Android devices.
Power + Volume Up, Power + Volume Down, or other combinations must be used when there are more than three buttons. Try and force a reboot to see whether it helps or not.
5: Loose Display Connectors
Important Information: Since this procedure may be hazardous, we only advise using it by specialists. Someone else can skip this and check out our other approaches.
A pogo pin connector is used to connect the display of your smartphone to the rest of the system, irrespective of the screen technology you select—LCD, IPS, or AMOLED. The LG Velvet 5G UW’s display is unable to exhibit any interactivity despite the system operating as it should because of a slack connection between the display and other parts. This is the black screen issue that you’re looking for, to put things in perspective.
To see if tightening weak screen connectors makes a difference, push the display’s front and rear. If not, we recommend moving to a business that has a service permit so that it may be properly fixed.
6: Use the Safe Mode
If the black screen issue on your LG Velvet 5G UW often happens and then resolves spontaneously, you can use safe mode to look into the issue. The system will closed down all outside programmes and processes while in safe mode. Even in safe mode, if the dark screen issue on your LG Velvet 5G UW persists, there may be a hardware issue or a serious software issue.
- Click the power button on your LG Velvet 5G UW to see your options. Select Safe Mode next.
- If you hold it down the “Power Off” option for a long time, you will get a choice to enter Safe Mode. Safe Mode will start when you click “OK.”
- To return to standard mode, just restart the phone.
7: Reset your phone. [How to repair the Black Screen problem on the LG Velvet 5G UW]
If you would like to fix any software problem completely, you may do this. Before performing a factory reset, make a backup of your data since anything you’ve added, edited, or deleted will be lost. Use a factory reset or the on-screen “Reset the phone” option found under “Settings” to do a “wipe data/factory reset.” You may also ask the device to perform a factory reset from your computer if you are comfortable with ADB tools.
Closing Words
Eventually, if (unfortunately) none of the diagnostic techniques discussed above help, we advice you to visit the closest Authorized Service Center as soon as you can.
Also read: Text messages not sending in LG Velvet 5G UW? Do this